Single Photon Detector System for Near-Infrared (1.6-2.3 um wavelength) waves with Closed-Cyle cooling

Insight Product Company is proud to offer Single Photon Detector System for Near-Infrared (1.6-2.3 um wavelength) waves with Closed-Cylce (cryogen-free)cooling .

Insight Product Co. offers superconducting single photon detectors and ultra-low noise registration systems for the near infrared range.

All systems operate in continuous mode, no gating required.

The system is based on fiber-coupled NbN superconducting single photon detectors and can have several independent channels (up to 8).

The superconducting detectors require cryogenic temperature, and Insight offers two type of cooling systems (LHe and closed-cycle).

Advantages:

  • Frequency range includes coverage into higher frequencies than other photon counters on the market.
  • Short dead time (10 nanoseconds) compared to long dead time (microseconds) of alternatives. Therefore rapid repeition rate of 10s of MHz possible, whereas alternative have maximimum repetition rate of 1-10 kHz.
  • Very small dark counts (10/second) compared to high dark count (1,000s / second) of alternatives. Does not require gated mode unlike alternatives. Works in continuous operation mode.

Therefore device can detect CW signal, which is impossible for the alternatives.

Cryogen-free system (Closed-cycle)

The closed-cycle refrigerator is a cryogen-free cooling system that does not use liquid helium (operating temperature 2.5 degrees Kelvin).

This type of detection setup would be ideal when the investigator wants to avoid handling liquid helium.

The close-cycle refrigirator can operate uninterrupted for months from an electrical power source.

Spectral range
Quantum efficiency (referred to optical input)
1.6-2.3 um
50%

Parameters of the Cryogen-Free System

Element/Parameter Closed-cycle refrigerator Compressor Control Unit
Weight, kg
25
75
1
Length x width x height
240 x 240 x 580 mm
450 x 320 x 560 mm
240 x 260 x 140 mm
Preparation time
150 minutes
NA
NA
Maintenance, hours
10,000
30,000
NA
Power consumption
1.5 kW *
30 W *

*Voltage of control unit and compressor: 100-240 V/ 50-60 Hz.

 

System specifications:

  • Timing jitter: less than or equal to 50 ps
  • Dark counts rate less than or equal to 10 cps
  • Counting rate: more than or equal to 100 MHz (Dead time less than or equal to 10 ns)
  • No afterpulsing
  • Fiber coupling (no misalignment)
  • Operation in continuous mode (no gating)

General parameters:

  • Number of channels: 1-4
  • Fiber: SMF 28e ( 980-HP, 780-HP, etc.)
  • Original output voltage: less than or equal to 150 mV
  • Possible types of output voltage: TTL, ECL, LVDS
  • Electrical connection: SMA
  • Driver interface: USB, LabVIEW

Applications:

  • Photonic quantum computing
  • Photon correlation measurements
  • Quantum cryptography and QKD
  • CMOS defect analysis
  • Single alpha and beta particle detection
  • TCSPC
  • Single molecule fluorescence spectroscopy
  • Ballistic imaging
  • Single plasmon detection, quantum plasmonics
  • Free space communication
  • LIDAR
  • Time-resolved fluorescence measurements
  • Single quantum dot fluorescence spectroscopy
  • On-chip quantum optics
  • Oxygen singlet/triplet fluorescence detection
  • Flow cytometry
  • Picosecond Integrated Circuits Analysis (PICA)
  • Single electron detection
  • Registration of extra low IR photon flux
  • Optical coherence tomography

Full selection of Single Photon Detectors


Contact:

E-mail: admin@insight-product.com
Phone: (617) 965-8151


                                   Copyright 2020 Insight Product Company