Specifications for IP Mag-2/10
Parameter |
Value
|
| Frequency range, MHz |
1885 ± 2
|
| Output Peak pulse power, MW |
10
|
| Output Average power, kW |
Regime 1: 30
Regime 2: 50
|
| Efficiency |
at least 45%
|
Anode voltage, kV |
55
|
Anode current (pulse), A |
regime 1: does not exceed 1.75
regime 2: does not exceed 3.0
|
| Control electrode current. microAmpere |
does not exceed 150
|
| Control electrode voltage. kW |
4 ±0.5
|
Pulse duration, microseconds |
3-10
|
| Repititon rate, Hz |
regime 1: 300
regime 2: 500
|
Duty cycle |
regime 1: 330
regime 2: 200
|
Voltage Standing Wave Ratio (VSWR) |
1.5
|
Cathode voltage, V |
15 at start
12 during operation
|
Cathode current, A |
250 at start
220 during operation
|
Solenoid current, A |
35 - 60
|
Weight, lbs |
176
|
| Cooling |
Water-based
|
| Water usage |
for Regime 1: 35 Liters/Minute
for Regime 2: 50 Liters/Minute
|
| Output waveguide dimensions, inches |
2.2 x 4.7
|
Maximium pressure of air near output waveguide |
does not exceed 4 ATM
|
Full selection of Pulse Magnetrons.
|
| Photo of IP Magnetron 2/10
|
