| Multi-channel S-band Klystron 2.45 GHz / 5 MW |
Insight Product Co. 's multi-channel S-band, 2.45 GHz, klystron provides up to 5.0 MW of output pulse power.
We offer this multi-channel pulse klystron that is optimal for medical linear particle accelerators (LINACs).
The klystron includes built-in permanent magnets.
Specifications for IP Klystron-S-2.45 GHz/ 5 MW
| Parameter |
Value |
| Operating frequency |
2450 +/- 4 MHz |
| Maximium pulse output power |
at least 5 MegaWatt |
| Average pulse output power |
at least 25 KilloWatt |
| Power supply pulse power |
does not exceed 13 MegaWatt |
| Heater power consumption |
does not exceed 800 Watt |
| Warm-up time |
does not exceed 15 minutes |
| Electronic beam current |
does not exceed 260 Ampere |
| Electronic beam resistance |
does not exceed 233 Ohm |
| Heater voltage |
does not exceed 30 Volts |
| Heater current |
does not exceed 30 Ampere |
| Beam voltage |
does not exceed 55 killoVolt |
| Pulse duration |
2.5-14.0 microseconds |
| Duty cycle |
at least 200 |
| Voltage standing wave ratio (VSWR) |
does not exceed 1.25 |
| Mass of klystron |
198.5 lbs (90 kgs) |
| Dimensions of klystron |
6.85 inches x 21.22 inches x 33.46 inches (174 mm x 539 mm x 850 mm) |
| Cooling |
Water-based for collectors and resonators |
| Water usage |
for collector: 75 Liters/Minute
for resonator: 18 Liters/Minute |
| Water (coolant) temperature |
4 degrees - 45 degees Celsius |
| Construction material |
metal-ceramics |
|
| 
Photo of Insight Product Multi-Channel Klystron S-2.45 GHz/ 5 MW
|
Contact:
| E-mail: |
admin@insight-product.com |
| Phone: |
(617) 965-8151 |
|
