| Parameter |
Value |
| Operating frequency |
2856 +/- 5 MHz |
| Maximium pulse output power in frequency range 2856 +/-2 MHz |
regime 1: at least 4.0 MegaWatt
regime 2: at least 6.0 MegaWatt
|
| Maximium pulse output power in frequency range 2856 +/-5 MHz |
regime 1: at least 3.5 MegaWatt
regime 2: at least 5.5 MegaWatt
|
| Minimium pulse output power in frequency range 2856 +/-5 MHz |
regime 1: at least 1.3 MegaWatt
regime 2: at least 2.0 MegaWatt |
| Power supply pulse power |
regime 1: does not exceed 10.0 MegaWatt
regime 2: does not exceed 15.0 MegaWatt
|
| Efficiency |
at least 40% |
| Heater power consumption |
does not exceed 650 Watt |
| Output Pulse duration |
2.5-7.0 microseconds |
| Duty cycle |
regime 1: 667
regime 2: 1000 |
| Cathode Voltage |
regime 1: does not exceed 46 KilloVolt
regime 2: does not exceed 53 KilloVolt
|
| Heater voltage |
does not exceed 26.0 Volts |
| Control electrode voltage |
4.0 +/- 0.5 KilloVolts |
| Cathode pulse current |
regime 1: does not exceed 230 A
regime 2: does not exceed 300 A |
| Heater current |
does not exceed 35 A |
| Control electrode current |
does not exceed 1 milliAmpere |
| Input pulse power |
does not exceed 50 Watt |
| Gain factor |
at least 50 dB |
| Voltage Standing Wave Ratio (VSWR) |
does not exceed 1.25 |
| Mass of klystron |
198.5 lbs |
| Dimensions of klystron |
35.4 inches (length) x 10.6 inches (width) |
| Mass of klystron, including magnets |
does not exceed 200 lbs |
| Coaxial input waveguide, dimensions |
0.28 inches x 0.12 inches |
| Output waveguide, dimensions |
2.83 inches x 1.34 inches |
| Cooling |
Water-based for collector and resonators |
| Water usage |
for collector: 20 Liters/Minute
for resonator: 5 Liters/Minute |
| Maximium pressure of air near output waveguide |
does not exceed 3 ATM |
| Construction material |
metal-ceramics |
